Grippax Wheel Cement Glue 8kg (Collection Only)

Grippax Wheel Cement Glue

PLEASE NOTE THIS ITEM IS COLLECTION ONLY FROM OUR TRADE COUNTERS

194 Windsor Street, Birmingham B7 4NE

or

35 - 39 Trinity Street, Sheffield, S3 7AJ

Grippax is a quick drying adhesive (size) suitable for bonding abrasives to mops and felt bobs and for general use as an adhesive.

It is particularly useful for bonding the finer grit sizes where skin glue would formerly have been used.

Grippax possesses a similar flexibility to skin glue, and like glue it is free from hard particles.

Mops and felt bobs made up with Grippax and fine abrasive last longer than when glue is used.

The method of application is simple. The cement is thoroughly stirred and a sizing coat of Grippax cement is applied to the face of the bob, which is then allowed to dry normally overnight, or may be heated in a well ventilated stove for an hour at a temperature not exceeding 62°C (145°F). When the sizing coat is dry, the wheel is dressed by applying a second coating of Grippax cement.   It is then pressed into the abrasive until the required coating is obtained, and is afterwards put away to dry.   A second coat, if necessary, may be applied in the same manner.

Old bobs or wheels that have previously been dressed with skin glue must have all traces of the original glue removed before Grippax is applied, and must also be free from grease.